Version with central top in the same packaging as the frame with extensions
1- Place the top (still packed) on trestles.
2- Remove the outer packaging.
3- Remove the inner cage.
4- Position the central top in its place.
5- Fix the central top.
6- Extend the top completely.
7- If necessary, adjust the plate to allow the locking pin to slide, otherwise go directly to point 15.
8- Turn the top until the plate is accessible.
9- Slightly loosen the screws of the plate.
10- Extend the table completely.
11- Correct the position of the plate.
12- Turn the top until the plate is accessible.
13- Fix the screws previously loosened.
14- Extend the top completely.
15- Lift the locking pin, turning it to lock it in place.
16- If the table does not open completely or the extensions are too far from the central top: adjust the extensions.
17- Loosen the cylinders inside the frame.
18- Holding the frame firmly, move the extensions outwards.
19- Extend the top completely, locking it in position with the locking pin.
20- Holding the frame firmly, return the extensions to their correct position.
21- Fix the cylinders inside the frame.
22- Move the trestles laterally to allow positioning of the table legs.
23- Fix the legs to the top.
24- To adjust the height of the extensions: loosen the cylinders inside the frame, decide the height using the adjusters and fix the cylinders back in place.
